Search

Single-phase voltage stabilizer HERTZ U 36-1/40 v3.0

Сравнить

Single-phase voltage regulator Hertz is designed to work in electrical networks with voltage fluctuations from 150 to 260V. In this range, the device is guaranteed to deliver a voltage at the output within 220 ± 1-1.5%, which is ensured through the use of 36 stabilization steps. The Hertz model range in terms of power can be 5.5, 7, 9, 11, 14, 18, 22 and 27.5 kW, which corresponds to an operating current of 25, 32, 40, 50, 63, 80, 100 and 125A, respectively.

The features of this stabilizer include an informative LCD screen, event memory, the highest stabilization accuracy, plotting voltage and load, an interface in three languages, the presence of electronic transit (bypass), silent operation due to the use of triacs (thyristors) as power switches.

If it is necessary to obtain a voltage different from 220V in Hertz at the output of the stabilizer, there is a function of adjusting this value in the range of 200-230V.

The Hertz stabilizer has the ability to manually adjust the lower shutdown threshold (60-135V). This function is in demand for a load with high inrush currents, at startup of which a strong voltage drop and emergency shutdown of the stabilizer are possible. When this option is activated, the stabilizer will make it possible to start any engine or pump within a minute, even if the voltage drops to 60V in the network.

It is recommended to install and operate the Hertz stabilizer in dry and heated rooms. It is recommended to mount the wall in a vertical position (fans up), leaving 10-15 cm at the top and bottom for cooling. The connection is made to the existing wiring through the terminal block.

Operating current, A 40
Rated power, kVA / kW 9.0
Number of stabilization steps 36
Key type triac
The efficiency of the stabilizer is not lower,% 98
Active power consumption at idle, no more, W 35
Nominal output voltage, V 220
Minimum operating input voltage, V 100
Maximum input operating voltage, V 280
Manual adjustment of the lower shutdown threshold, V 60-135
Manual regulation of output voltage, V 200-230
Accuracy in the stabilization range,% 1.5
Response time to changes in input voltage, ms 20
Power supply frequency, Hz 45-65
Input Current and Apparent Power Measurement yes
Short-circuit and overload current limitation input circuit breaker with B-characteristic electromagnetic protection
Electronic Bypass yes
Network and Stabilizer Condition Analyzer yes
Duplicate overvoltage protection yes
Microcontroller control yes
Input choke yes
Output choke yes
Overheating protection yes
Minimum cable cross-section for connection, mm² 6
Maximum cross-section of cable conductors for connection, mm² 30
Forced Cooling two speed fan
Overall dimensions, mm, no more 480x270x170
Weight, kg, no more 21
Warranty, years 7
Back to Top
Product has been added to your cart