Search

Search

Single-phase voltage stabilizer AMPERE U 9-1/32 v2.1

Сравнить

Single-phase voltage stabilizer Ampere U 9-1 / 32 v2.1 (standard) is designed to operate in electrical networks with voltage fluctuations from 160 to 260 V. In this range, the device is guaranteed to output a voltage within 220 ± 4.5%, which provided through the use of 9 stages of stabilization. The rated power of this model is 7 kW, which corresponds to the operating current of the 32A circuit breaker on it.

The features of this stabilizer include a double LED screen, a linear loading strip, the presence of electronic transit (bypass), a convenient location of the terminal block for connection on the back of the case, silent operation due to the use of triacs as power switches.

It is recommended to install and operate the Ampere U 9-1 / 32 v2.1 stabilizer in dry and heated rooms. It is recommended to mount the wall in a vertical position (fans up), leaving 10-15 cm at the top and bottom for cooling. The connection is made to the existing wiring through the terminal block.

Operating current, A 32
Rated power, kVA / kW 7.0
Number of stabilization steps 9
Key type triac
The efficiency of the stabilizer is not lower,% 98
Active power consumption at idle, no more, W 35
Nominal output voltage, V 220
Minimum operating input voltage, V 135
Minimum operating input voltage in bypass mode, V 120
Maximum operating input voltage in bypass mode, V 265
Maximum input operating voltage, V 285
Stabilization accuracy,% 4.5
Response time to changes in input voltage, ms 20
Power supply frequency, Hz 45-65
Input Current and Apparent Power Measurement yes
Short-circuit and overload current limitation input circuit breaker with B-characteristic electromagnetic protection
Electronic Bypass yes
Network and Stabilizer Condition Analyzer yes
Duplicate overvoltage protection yes
Microcontroller control yes
Input choke yes
Output choke no
Overheating protection yes
Minimum cable cross-section for connection, mm² 6
Maximum cross-section of cable conductors for connection, mm² 30
Forced Cooling two speed fan
Overall dimensions, mm, no more 460х275х165
Weight, kg, no more 21
Warranty, years 3
Back to Top
Product has been added to your cart