Search

Нет в наличии

Single-phase voltage stabilizer AMPERE U 12-1/10 v2.0

Сравнить
SKU:198en

Single-phase voltage stabilizer “Ampere 12” (standard) is designed to operate in electrical networks with voltage fluctuations from 145 to 275V. In this range, the device is guaranteed to deliver a voltage at the output within 220 ± 3.5%, which is ensured through the use of 12 stabilization steps.

The lineup of all listed Amperes in terms of power can be 2.2, 3.5, 5.5, 7, 9, 11, 14 and 18 kW, which corresponds to an operating current of 10, 16, 25, 32, 40, 50, 63 and 80A, respectively.

The features of this stabilizer include silent operation due to the use of triacs (thyristors) as power switches and the presence of electronic transit (bypass).

The Ampere stabilizer in 12 steps has the ability to manually adjust the lower shutdown threshold (60-135V). This function is in demand for a load with high inrush currents, at startup of which a strong voltage drop and emergency shutdown of the stabilizer are possible. When this option is activated, the stabilizer will make it possible to start any engine or pump within a minute, even if the voltage drops to 60V in the network.

It is recommended to install and operate the Ampere stabilizer in dry and heated rooms. It is recommended to mount the wall in a vertical position (fans upwards), leaving 10-15cm at the top and bottom for cooling. The connection is made to the existing wiring through the terminal block.

Operating current, A 10
Rated power, kVA / kW 2.2
Number of stabilization steps 12
Key type triac
The efficiency of the stabilizer is not lower,% 98
Active power consumption at idle, no more, W 30
Nominal output voltage, V 220
Minimum operating input voltage, V 100
Output voltage regulation, V no
Adjustment of the lower threshold of shutdown, V no
Maximum input operating voltage, V 295
Stabilization accuracy,% 3.5
Response time to changes in input voltage, ms 20
Power supply frequency, Hz 45-65
Input Current and Apparent Power Measurement yes
Short-circuit and overload current limitation input circuit breaker with B-characteristic electromagnetic protection
Electronic Bypass no
Network and Stabilizer Condition Analyzer yes
Duplicate overvoltage protection yes
Microcontroller control yes
Input choke yes
Output choke no
Overheating protection yes
Minimum cable cross-section for connection, mm² -
Maximum cross-section of cable conductors for connection, mm² -
Forced Cooling two speed fan
Overall dimensions, mm, no more 400х235х145
Weight, kg, no more 13.5
Warranty, years 7
Back to Top
Product has been added to your cart