Search

Single-phase voltage stabilizer HYBRID U 9-1/16 v2.0

Сравнить

The single-phase voltage stabilizer Hybrid 9 is designed to operate in very unstable electrical networks with significant voltage fluctuations from 135 to 315 V (145-300 V for low-power products). In this range, the device is guaranteed to output a voltage within 220 ± 7.5%, which is ensured through the use of 9 stabilization steps.

The range of Hybrids in terms of power can be 5.5, 7, 9 kW, which corresponds to an operating current of 25, 32, 40 A, respectively, as well as a low power of 2.2 and 3.5 kW with an operating current of 10 and 16 A.

This stabilizer has the ability to work with “green” power supply systems, and Hybrid 9 has an electronic transit (bypass) function, which distinguishes it from other models.

It is recommended to install and operate the Hybrid stabilizer in dry and heated rooms. It is recommended to mount the wall in a vertical position (fans up), leaving 10-15 cm at the top and bottom for cooling. Connection is made to the existing wiring through a terminal block for devices from 5.5 to 9 kW and through a built-in cord with a plug and socket on the stabilizer body for models 2.2 and 3.5 kW.

Operating current, A 16
Rated power, kVA / kW 3.5
Number of stabilization steps 9
Key type triac duplicated by an electromagnetic relay
The efficiency of the stabilizer is not lower,% 98
Active power consumption at idle, no more, W 15
Nominal output voltage, V 220
Minimum operating input voltage, V 130
Adjustment of the lower threshold of shutdown, V no
Output voltage regulation, V no
Maximum input operating voltage, V 310
Stabilization accuracy,% 7.5
Response time to changes in input voltage, ms 100
Power supply frequency, Hz 45-65
Input Current and Apparent Power Measurement yes
Short-circuit and overload current limitation input circuit breaker with B-characteristic electromagnetic protection
Electronic Bypass no
Network and Stabilizer Condition Analyzer yes
Duplicate overvoltage protection yes
Microcontroller control yes
Input choke no
Output choke no
Overheating protection yes
Minimum cable cross-section for connection, mm² -
Maximum cross-section of cable conductors for connection, mm² -
Forced Cooling two speed fan
Overall dimensions, mm, no more 378х225х143
Weight, kg, no more 13.5
Warranty, years 2 years or 200,000 relay operations
Back to Top
Product has been added to your cart